8 Gilbert Tile Floor Problems and How to Solve Them
Tile floors can improve the value of your Gilbert home. They are durable and low-maintenance, and they make any home look more beautiful. Getting regular Gilbert tile and grout cleaning will keep the floors in good shape and looking good. Yet accidents still happen, and age can wear down even the highest-quality materials.
Here are some common problems you might experience with your tile floors and the best strategy to fix them:
If the tile has come completely loose, you will just need to lift it up and use a chisel to remove any remaining grout or adhesive from the back. If the tile is still sticking in a certain spot, you will have to pry it loose with the chisel and then remove the adhesive. Then put a little adhesive on the tile and subfloor and put the tile back in place. Repair any broken grout around the tile.
Use a tile repair kit or a bit of nail polish to dab over small chips in tile. You may have to mix a few colors to match the tile. Apply very small amounts until you fill the chip. Use 100 percent acetone to delicately repair any mistakes.
Larger Chips or Holes
Use ceramic filler to repair larger chips and holes. Blend colors to get the match, and use a small putty knife to apply the product. When the filler dries, sand it smooth and seal it with a coat of lacquer.
Fill small cracks in tile with silicone caulk. Small cracks may not be noticeable after they are filled. You may have to cover the larger cracks with paint to match the tile after they are filled. Use an oil-based paint that will resist wear from foot traffic.
The only way to repair broken tile is to replace it. When you have new tile floors installed, you should get a small batch of replacement tiles for repairs. If you don’t have extras, you’ll have to try your luck with finding a tile that will match yours or complement it. If all else fails and you can’t replace all the tile, you can just put an accent rug over the mismatched tile.
Stained or Cracked Grout
You have to completely remove the old grout and then re-grout the floor. This is a hard and messy job, and it’s one best left to the professionals.
If your Gilbert tile floor is looking old or outdated, you may be able to repaint it, just like you would re-glaze a tub. If that’s not an option, you will be looking at totally replacing the floor.
You can’t always fix your tile floors. Sometimes, you have to replace them entirely. One way to save a little time and money is to install the new tiles right on top of the old tiles. You may need to move your baseboards or molding, depending on the thickness of the tile.
Once you have made repairs or replaced your tile, make sure you get regular professional tile floor cleaning to keep the floors in their best shape and looking great. Desert Tile and Grout Care provides professional tile floor cleaning in Gilbert for both residential and commercial customers. Our tile and grout cleaning can restore your floors to look as good as new, and they can minimize further damage to your floors. Contact us today to learn more about out services.
2917 E. Park Avenue
Gilbert, Arizona 85234